Diode Pumped Solid State Lasers
Diode Pumped Solid State Lasers


The RAPID NX is a high energy picosecond laser system that offers <15 ps pulses at 1 MHz in a cost-effective package that is fit for the most demanding 24/7 industrial precision micromachining applications where the ablation quality and system cost are of the highest priority.

High Power Industrial ps-Laser

The RAPID NX is designed for industrial micromachining and offers ultrafast machining capability at an unprecedented price point. The RAPID NX offers all the features of the RAPID-series lasers at a lower power level and entry price. The system is designed for demanding specialty marking, engraving and LED dicing applications. The included intuitive software controls all laser functions via internal embedded processor. An optional DLL allows the user to control the laser via an external network.



Precise Metal Marking & Cutting
Semiconductor Manufacturing

Features & Benefits

  • 7W at 1064 nm
  • Repetition rate range from 50 kHz to 1000 kHz
  • Up to 50µJ pulse energy
  • Pulse on demand
  • Burst mode
  • High beam quality M2 < 1.3
  • Superior beam parameter and pointing stability across the complete PRF range
  • Fully field serviceable
  • Low maintenance
Fundamental center wavelength1064.5 nm +/- 0.5 nm
Output energy 7 µJ @ 1064 nm, 1 MHz (7W) 12 µJ @ 1064 nm, 500 kHz (6W) 25 µJ @ 1064 nm, 200 kHz (5W) 40 µJ @ 1064 nm, 100 kHz (4W)At 1064 nm
Repetition rate50 kHz to 1 MHzSeed pulse frequency is in the range of 40 MHz to 42 MHz and the integer divisor of this seed clock frequency in the specified repetition rate range is accessible.
Pulse width10 ps to 15 psAssuming a sech2 fit
Mode qualityM2 , 1.3
Beam waist diameter1 +/- 0.2 mm
Beam waist locationAt output port +/- 25% of RR
Astigmatism± 25% of Rayleigh Range
Ellipticity0.85 < e < 1.15
Mode parameter change with rep-rateMode must remain within the specification, but will change with rep-rate.
Polarisation ratio > 100:1
Polarisation directionVertical ± 3 degrees IR
Contrast ratio> 100:1Defined as the energy ratio of the main pulse and first post pulse
Pulse stability (RMS)< 1% at 1 MHzMeasured over 1000 pulses - 1 sigma
Pulse stability (pk-pk)< 5%For 1000 consecutive pulses
Power stability< 1% over 8 hoursPk to Pk variation of the rolling average power (average power measured every 30 seconds and averaged over 5 minutes)
Warm up timeCold start: < 15 minutes Warm start: < 10 minutes
CW leakage< 5% output power
Long-term pointing stability at fixed rep-rate< ±25 µradOver 8 hours
Pulse controlProcess pulse picker as standard to deliver dynamic pulse control
Head weight62 lbs; 28 kg
PSU dimensions19-inch rack mounted - 3U
External commsRS 232; EthernetInputs on the PSU; USB as an option
Power consumption100V to 240V AC; < 500WTypical operational

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.

I have read the terms and conditions